Description:
The Panda 1 enables you to simply add automation capabilities to your home. The device is designed to have very low standby power consumption. This can reduce the overall energy consumption of your Home automation installation significantly.
Below, you can see a sample installation wiring diagram:
Technical data
| Parameter | Value |
|---|---|
| Power supply | 230V AC |
| Switching capability | up to 150W (resistive) |
| Active energy consumption | 0.15~0.35W |
| Standby energy consumption | <0.08W |
| CPU | CC2530 |
| Wireless technology | ZigBee, IEEE 802.15.4 |
| Safety | On-Board Fuse for powersupply |
Pairing
The Panda 1 starts with the pairing process after the first powerup. The Panda1 will then join an existing network if possible. You can reset the pairing state and start the pairing process by pressing the appropriate pairing button at the top side of the Panda 1.
Software support
The Panda 1 is fully compliant with Zigbee2MQTT Project and therefore also with the HomeAssistant and OpenHab project. Basically with everything which can connect to a MQTT environment.
Comparison between similar product
There are also products on the market which have simmilar functionalities but use WiFi instead of ZigBee as communication technology. These modules often consume much more energy. Below you can find a comparison between such a WiFi module.
Progress: testing
Current rev.: A
PCB: ED2004-012-A
